數位天堂

哪位大侠给看看我的配置文件错在那里了？谢谢
S99rtorrent

#!/bin/sh

dirlayout=RTORRENT_ANOTHER

# . /etc/rtorrent.init.conf

user="admin"

# group=`id -ng "$user"`

prefix="/opt"

# the full path to the filename where you store your rtorrent configuration
if [ "${dirlayout}" = "RTORRENT_DEFAULT" ] ; then
  config="${prefix}/home/${user}/.rtorrent.rc"
else
  config="/opt/etc/rtorrent.conf"
fi

# set of options to run with
if [ "${dirlayout}" = "RTORRENT_DEFAULT" ] ; then
  options=""
else
  options="-n -o import=${config}"
fi

# default directory for screen, needs to be an absolute path
if [ "${dirlayout}" = "RTORRENT_DEFAULT" ] ; then
  base="${prefix}/home/${user}"
else
  base="/opt/bt/torrent"
fi

# name of screen session
srnname="rtorrent"

# file to log to (makes for easier debugging if something goes wrong)
#logfile="/opt/var/log/rtorrentInit.log"

#######################
###END CONFIGURATION###
#######################
PATH=/opt/bin:/opt/sbin:/usr/bin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

# Do not proceed unless some apps are available.
test -x /opt/bin/screen || ( echo "screen not found." | tee -a "$logfile" >&2 ;
test -x /opt/bin/su -o -x /bin/su || ( echo "su not found." | tee -a "$logfile"

checkcnfg() {
        exists=0
        for i in `echo "$PATH" | tr ':' '\n'` ; do
                if [ -f "$i/$NAME" ] ; then
                        exists=1
                        break
                fi
        done


        if [ $exists -eq 0 ] ; then
                echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logf
                exit 3
        fi
        if ! [ -r "${config}" ] ; then
                echo "cannot find readable config ${config}. check that it is th
                exit 3
        fi
        session=`getsession "$config"`
        if ! [ -d "${session}" ] ; then
                echo "cannot find readable session directory ${session} from con
                exit 3
        fi
}

d_start() {
  [ -d "${base}" ] && cd "${base}"

  stty stop undef && stty start undef
  su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "scr
  # this works for the screen command, but starting rtorrent below adopts screen
  # even if it is not the screen session we started (e.g. running under an undes
  #su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg
  su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null"
}

d_stop() {
        session=`getsession "$config"`
        if ! [ -s ${session}/rtorrent.lock ] ; then
                return
        fi
        pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9
        if ps | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't bel
                kill -s INT ${pid}
        fi
}

getsession() {
        session=`awk '/^[[:space:]]*session[[:space:]]*=[[:space:]]*/{print($3)}
        echo $session
}

checkcnfg

case "$1" in
  start)
        echo -n "Starting $DESC: $NAME"
        d_start
        echo "."
        ;;
  stop)
        echo -n "Stopping $DESC: $NAME"
        d_stop
        echo "."
        ;;
  restart|force-reload)
        echo -n "Restarting $DESC: $NAME"
        d_stop
        sleep 1
        d_start
        echo "."
        ;;
*)
        echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
        exit 1
        ;;
esac

exit 0


rtorrent.conf[u]

cgi_port = localhost:5000
min_peers = 0
max_peers = 40
max_uploads = 5
port_range = 51777-51780
use_udp_trackers = yes
safe_sync = yes
dht = auto
dht_port = 6881
peer_exchange = yes
download_rate = 0
upload_rate = 60
check_hash = no
hash_read_ahead = 5
hash_max_tries = 5
hash_interval = 10
directory = /opt/bt/download/
session = /opt/bt/cache/
schedule = watch_directory,5,5,load_start=/opt/bt/torrent/*.torrent
schedule = untied_directory,5,5,stop_untied=
schedule = untied_directory,5,5,close_untied=
schedule = untied_directory,5,5,remove_untied=
schedule = low_diskspace,5,60,close_low_diskspace=50M
encoding_list = UTF-8

Aven 提到:

不知您是參考哪一篇文章安裝rtorrent，預設路徑和板上教程不太一樣?

rTorrent + nTorrent 完整攻略：https://digiland.tw/viewtopic.php?id=688

rtorrent.conf--------此文件中关于路径的配置是以前rtorrent正常时的配置文件，
S99rtorrent---------是现在rtorrent - 0.8.6-1 版自动生成的配置文件。

我今晚还是按照rTorrent + nTorrent 完整攻略：https://digiland.tw/viewtopic.php?id=688  的教程改改rtorrent.conf文件试一试吧。

谢谢Aven你的提醒


现在搞定了：
S99rtorrent--按照论坛改“rTorrent + nTorrent 完整攻略”中的设定

若搜尋到 #!/opt/bin/bash 請改成 #!/bin/sh
若搜尋到 user="p2p" 或 user="root" 改成 user="admin"
若搜尋到 #dirlayout="RTORRENT_DEFAULT" 取消#字號並改成 dirlayout="RTORRENT_ANOTHER"

其他不做更改

rtorrent.conf ：不做更改

flashfs save && flashfs commit &&  flashfs enable && reboot

/opt/etc/init.d/S99rtorrent start

screen -r 即可进入rtorrent

我没有用rtorrent别的客户端，只是这样用。熟悉了还是很方便的，而且可以节约有限的资源。呵呵，个人认为。

谢谢Aven及数位天堂论坛，以及各位网友，这个论坛真的太棒了！！！

最後修改： zchwy (2010-05-27 00:48:15)