#1 2010-12-16 12:05:59
有人使用usb_modeswitch切換過BandLuxe C170和C270成功的嗎?
不知道是否有人使用usb_modeswitch切換Bandluxe C170,C270成功過的?
我有去usb_modeswitch官網下載最新的usb_modeawitch v1.1.5最新版的程式,
並利用usb-modeswitch-data 2010-12-02版的conf資料夾來切換如下,一直不成功
不知道有沒有前輩們有遇過這問題,小弟現在還在研究SniffUSB這軟體,和conf參數的關
聯性可否有前輩們一起討論指教的,Thanks.
# usb_modeswitch -c /tmp/1a8d_1000
Warning: TargetProductList overrides TargetProduct!
Looking for target devices ...
No devicoption1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
es in target mode or class found
Looking for default devices ..option 1-1:1.0: device disconnected
.
Found devices in default mode or class (1)
Accessing device 002 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using endpoints 0x01 (out) and 0x81 (in)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("option")
OK, driver "option" detached
SCSI inquusb 1-1: usbfs: process 3494 (usb_modeswitch) did not claim interface 0 before use
iry data (for identification)
-------------------------
Vendor String: BandRich
Model String: CDROM
Revision String: 2.01
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: BandRich, Inc.
Product: BandLuxe 3.5G HSPA Adapter
Serial No.: 358094021942991
-------------------------
Setting up communication with interface 0 ...
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Reading the response to the message (CSW) ...
OK, response successfully read (13 bytes).
Trying to send message 2 to endpoint 0x01 ...
OK, message successfully sent
Reading the response to message 2 ...
OK, response successfully read (13 bytes).
Resetting response endpoint 0x81
Resetting message endpoint 0x01
Checking for mode switch (max. 20 times, once per second) ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Original device still present after the timeout
Mode switch most likely failed. Bye.
#
我的conf檔如下:
########################################################
# BandRich BandLuxe C100, C120, C170, C270
DefaultVendor= 0x1a8d
DefaultProduct=0x1000
TargetVendor= 0x1a8d
TargetProductList="1002,1009"
MessageContent="5553424312345678000000000000061e000000000000000000000000000000"
MessageContent2="5553424312345679000000000000061b000000020000000000000000000000"
NeedResponse=1
CheckSuccess=20離線
