數位天堂

Nokia:科技始終來自於人性; 拜耳:如果文明不能使我們更相愛,那科技便失去意義!
歡迎您的加入,讓我們一起討論科技與環保的整合應用...

您尚未登入。

#1 2009-10-20 18:34:25

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

D-Link DIR-300 A1 & B1 超級比一比

最近這一兩年網壇上興起大刷第三方韌體風,這股旋風大概是去年的WL-520GU/GC開始悶燒,為了家用的無線路由器跑起來更穩更強不熱當,網民紛紛改刷DD-WRT或Tomato等第三方韌體。

如今這股風已經延燒到D-Link DIR-300身上,D-Link DIR-300從去年推出至今已經進入到第二版(Rev.B1,以下簡稱B1)硬體規格,早期第一版也就是Rev.A1(以下簡稱A1)即因DD-WRT韌體有支援的關係加上價格便宜,入手價格通常1000有找,近來還有網路商店拿來當成購買小筆電之贈品,所以在網路上造就了一股刷機熱潮。

這兩台當紅炸子機,倒底有何不同呢?
底下就從外觀開始介紹
A1包裝盒
http://farm3.static.flickr.com/2475/4028401807_4247faa009_o.jpg
 
B1包裝盒
http://farm3.static.flickr.com/2727/4029156450_5b2610c6a6_o.jpg
 
包裝盒底部有機型標籤方便區別(紅色框處)
http://farm3.static.flickr.com/2599/4029156218_b57151fdaa_o.jpg
 
實機正面照片(下:A1,上:B1)
http://farm3.static.flickr.com/2736/4029156596_275c7153a9_o.jpg
 
上面俯拍(左:A1,右:B1 原廠很港乎多一層貼紙,要你使用前先執行Wizard)
http://farm3.static.flickr.com/2662/4029156696_86c9cb886d_o.jpg
 
底部也來一張
http://farm4.static.flickr.com/3509/4028402251_af0fbb66d5_o.jpg
 
撕開貼紙,後方的比較,乍看之下相似度達到95%
http://farm4.static.flickr.com/3284/4028402379_c226755461_o.jpg

就以外觀來看,兩者非常容易分辨,A1中間圍著一條銀色面板,頂部是霧面處理,B1則是全黑造型,頂部則是鋼琴鏡面,相較之下A1新潮大方,B1質感優雅(這樣講兩者都不得罪tongue)。

以上是外觀的部份比較,希望有意選購的朋友能夠快速分辨出A1及B1的差別。





技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#2 2009-10-20 19:26:45

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: D-Link DIR-300 A1 & B1 超級比一比

介紹了外觀,接下來就來討論一下官方韌體界面差異
A1登入畫面
https://digiland.tw/uploads/2_dir300a_login.gif
 
B1登入畫面,多一層驗證
https://digiland.tw/uploads/2_dir300b_login.gif
 
官方韌體版本
A1停留在1.04版,2008/7/5,看來有支援DD-WRT後,官方韌體更新工作都可以省下來
https://digiland.tw/uploads/2_dir300a_fw_upgrade.gif
 
B1則是2.00版,2009/5/7
https://digiland.tw/uploads/2_dir300b_fw_upgrade.gif
 
A1無線網路規格是802.11g
https://digiland.tw/uploads/2_dir300a_wlan_mode.gif
 
B1無線網路規格則進步到802.11n
https://digiland.tw/uploads/2_dir300b_wlan_mode.gif
 
打開筆電實測無線連線速度顯示270Mbps fear
https://digiland.tw/uploads/2_dir300b_wlan_client.gif

看來兩者除了外觀差異之外,硬體規格有顯著的不同,尤其是無線網路B1已經支援到802.11n。咦..包裝盒上明明只標記802.11g,54Mbps等字眼,為何實際上卻是不折不扣的802.11n,不知有沒有人會為此去告原廠包裝不實,這應該算是廠商給消費者的bonus milk




技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#3 2009-10-20 21:17:03

yuzt
新生
註冊日期: 2008-10-26
文章數: 22
目前積分 :   
網站

Re: D-Link DIR-300 A1 & B1 超級比一比

请问有没有内部对比图?


離線

 

#4 2009-10-21 01:06:19

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: D-Link DIR-300 A1 & B1 超級比一比

接下來,我們試刷DD-WRT韌體,DIR-300 Rev.A1要刷DD-WRT應該可以列入史上程序最複雜難搞的刷機任務之一,詳細流程在友站 network01 有充分圖解,指導您一步一步完成刷機動作,有興趣的朋友可以參考。

DIR-300 Rev.A1 DD-WRT 成功刷機
https://digiland.tw/uploads/2_dir300a_dd_status.gif

底下列出A1系統資訊

DD-WRT v24-sp2 std (c) 2009 NewMedia-NET GmbH Release: 10/10/09 (SVN revision: 13064) DD-WRT login: root Password: ========================================================== ____ ___ __ ______ _____ ____ _ _ | _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || | || | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_ ||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _| |___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_| DD-WRT v24-sp2 http://www.dd-wrt.com ========================================================== BusyBox v1.13.4 (2009-10-10 03:14:27 CEST) built-in shell (ash) Enter 'help' for a list of built-in commands. root@DD-WRT:~# cat /proc/cpuinfo system type : Atheros AR2317 processor : 0 cpu model : MIPS 4KEc V6.4 BogoMIPS : 183.50 wait instruction : yes microsecond timers : yes tlb_entries : 16 extra interrupt vector : yes hardware watchpoint : no ASEs implemented : shadow register sets : 1 VCED exceptions : not available VCEI exceptions : not available root@DD-WRT:~# cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 13385728 12218368 1167360 0 1249280 4698112 Swap: 0 0 0 MemTotal: 13072 kB MemFree: 1140 kB MemShared: 0 kB Buffers: 1220 kB Cached: 4588 kB SwapCached: 0 kB Active: 888 kB Inactive: 796 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 13072 kB LowFree: 1140 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB Mapped: 214 kB Slab: 124 kB CommitLimit: 6536 kB Committed_AS: 2288 kB PageTables: 1452 kB VmallocTotal: 1048404 kB VmallocUsed: 20 kB VmallocChunk: 1048364 kB


 
相對於難搞的A1,B1版若要刷DD-WRT韌體已經可以透過瀏覽器從官方韌體更新頁面直接更新 yes
https://digiland.tw/uploads/2_dir300b_dd_upgrade.gif

DIR-300 Rev.B1 DD-WRT 成功刷機
https://digiland.tw/uploads/2_dir300b_dd_status.gif

DD-WRT 也支援 802.11n
https://digiland.tw/uploads/2_dir300b_dd_wlan_mode.gif

DD-WRT v24-sp2 std (c) 2009 NewMedia-NET GmbH Release: 10/10/09 (SVN revision: 13064) DD-WRT login: root Password: ========================================================== ____ ___ __ ______ _____ ____ _ _ | _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || | || | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_ ||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _| |___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_| DD-WRT v24-sp2 http://www.dd-wrt.com ========================================================== BusyBox v1.13.4 (2009-10-10 11:39:04 CEST) built-in shell (ash) Enter 'help' for a list of built-in commands. root@DD-WRT:~# cat /proc/cpuinfo system type : Ralink SoC processor : 0 cpu model : MIPS 24K V4.12 BogoMIPS : 212.99 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes ASEs implemented : mips16 dsp VCED exceptions : not available VCEI exceptions : not available root@DD-WRT:~# cat /proc/meminfo total: used: free: shared: buffers: cached: Mem: 30310400 14610432 15699968 0 1544192 5054464 Swap: 0 0 0 MemTotal: 29600 kB MemFree: 15332 kB MemShared: 0 kB Buffers: 1508 kB Cached: 4936 kB SwapCached: 0 kB Active: 1077 kB Inactive: 730 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 29600 kB LowFree: 15332 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB Mapped: 203 kB Slab: 127 kB CommitLimit: 14800 kB Committed_AS: 1820 kB PageTables: 1611 kB VmallocTotal: 1048404 kB VmallocUsed: 17088 kB VmallocChunk: 1031316 kB


 
兩者硬體規格比較表
https://digiland.tw/uploads/2_dir300a1pkb1.gif

到底熟優熟劣本篇不做任何推薦,畢竟兩者前後上市時間已隔了將近一年,難免在規格上存在部份差異,不過在經過更新成DD-WRT韌體後,兩者附加價值又往上提升一步,在此提供大家在網路上選購時提供一個參考。



技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#5 2009-10-21 01:14:36

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: D-Link DIR-300 A1 & B1 超級比一比

yuzt 提到:

请问有没有内部对比图?

機器為廠商借測,恕無法拆機拍照。
這裡有 DIR-600 的拆機圖,據 DD-WRT Forum 討論文章 DIR-300 Rev.B1 = DIR-600 Rev.B1 您可以參考看看。


最後修改: Aven (2009-10-21 09:24:23)



技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#6 2009-10-21 11:40:50

cris
教士
註冊日期: 2008-12-18
文章數: 74
目前積分 :   

Re: D-Link DIR-300 A1 & B1 超級比一比

請問這台是不是只能刷標準版的 DD-wrt?


離線

 

#7 2009-10-21 12:14:43

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: D-Link DIR-300 A1 & B1 超級比一比

cris 提到:

請問這台是不是只能刷標準版的 DD-wrt?

目前看起來是只有標準版可刷。



技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#8 2009-10-21 17:57:43

hippo
天使
註冊日期: 2008-10-07
文章數: 1562
目前積分 :   20 

Re: D-Link DIR-300 A1 & B1 超級比一比

以頻率判斷,
DIR-300 rev.B1 RT3052(384MHz)
DIR-600 RT3050(320MHz)
另外, 請問站長有沒有dmesg與/var/log/messages?
今晚在家樂福也看到DIR-300 B1版本. PCHome看來還是A1版本.

參考:
雷凌

最後修改: hippo (2009-10-21 22:53:55)


離線

 

#9 2009-10-21 23:13:28

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: D-Link DIR-300 A1 & B1 超級比一比

Rev.A1 dmesg &  /var/log/messages(空的)

root@DD-WRT:~# dmesg <5>Linux version 2.6.24.111 (root@dd-wrt) (gcc version 4.1.1) #22661 Sat Oct 10 03:19:35 CEST 2009 <6>mips devid = 90 <4>CPU revision is: 00019064 <0>mem setup <4>Determined physical RAM map: <4> memory: 01000000 @ 00000000 (usable) <4>User-defined physical RAM map: <4> memory: 01000000 @ 00000000 (usable) <7>On node 0 totalpages: 4096 <7> Normal zone: 32 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 4064 pages, LIFO batch:0 <7> Movable zone: 0 pages used for memmap <4>Built 1 zonelists in Zone order. Total pages: 4064 <5>Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs noinitrd mem=16M <4>Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. <4>Primary data cache 16kB, 4-way, linesize 16 bytes. <6>Synthesized TLB refill handler (20 instructions). <6>Synthesized TLB load handler fastpath (32 instructions). <6>Synthesized TLB store handler fastpath (32 instructions). <6>Synthesized TLB modify handler fastpath (31 instructions). <4>PID hash table entries: 64 (order: 6, 256 bytes) <4>Using 92.000 MHz high precision timer. <6>console [ttyS0] enabled <6>Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) <6>Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) <6>Memory: 12948k/16384k available (2222k kernel code, 3436k reserved, 289k data, 124k init, 0k highmem) <7>Calibrating delay loop... 183.50 BogoMIPS (lpj=917504) <4>Mount-cache hash table entries: 512 <6>NET: Registered protocol family 16 <4>scanning for board data at A83FF000 (FFFFFFFF) <4>scanning for board data at A83FE000 (FFFFFFFF) <4>scanning for board data at A83FD000 (FFFFFFFF) <4>scanning for board data at A83FC000 (FFFFFFFF) <4>scanning for board data at A83FB000 (FFFFFFFF) <4>scanning for board data at A83FA000 (FFFFFFFF) <4>scanning for board data at A83F9000 (FFFFFFFF) <4>scanning for board data at A83F8000 (FFFFFFFF) <4>scanning for board data at A83F7000 (FFFFFFFF) <4>scanning for board data at A83F6000 (FFFFFFFF) <4>scanning for board data at A83F5000 (FFFFFFFF) <4>scanning for board data at A83F4000 (FFFFFFFF) <4>scanning for board data at A83F3000 (FFFFFFFF) <4>scanning for board data at A83F2000 (FFFFFFFF) <4>scanning for board data at A83F1000 (FFFFFFFF) <4>scanning for board data at A83F0000 (35333131) <4>found 1 <4>Found board config at 0xa83f0000 <4>Radio config found at offset 0xf8(0x1f8) (a83f00f8) <6>Generic PHY: Registered new driver <6>Time: MIPS clocksource has been installed. <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP established hash table entries: 512 (order: 0, 4096 bytes) <6>TCP bind hash table entries: 512 (order: -1, 2048 bytes) <6>TCP: Hash tables configured (established 512 bind 512) <6>TCP reno registered <5>gpio_proc: module loaded and /proc/gpio/ created <6>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) <6>devfs: boot_options: 0x1 <6>squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>io scheduler noop registered <6>io scheduler deadline registered (default) <6>Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled <6>serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A <3>serial8250 serial8250.0: unable to register port at index 0 (IO3f8 MEM0 IRQ4): -28 <3>serial8250 serial8250.0: unable to register port at index 1 (IO2f8 MEM0 IRQ3): -28 <3>serial8250 serial8250.0: unable to register port at index 2 (IO3e8 MEM0 IRQ4): -28 <3>serial8250 serial8250.0: unable to register port at index 3 (IO2e8 MEM0 IRQ3): -28 <6>Infineon ADM6996: Registered new driver <6>Marvell 88E6060/88E6061: Registered new driver <6>PPP generic driver version 2.4.2 <6>PPP Deflate Compression module registered <6>PPP BSD Compression module registered <6>MPPE/MPPC encryption/compression module registered <6>NET: Registered protocol family 24 <6>tun: Universal TUN/TAP device driver, 1.6 <6>tun: (C) 1999-2004 Max Krasnyansky <0>scanning for root partition <0> <4>found squashfs at 100000 <0>found RedBoot partition at [0xBFC00000] <0>found linux partition at [0xBFC30000] <5>Creating 8 MTD partitions on "spiflash": <5>0x00000000-0x00030000 : "RedBoot" <5>0x00030000-0x003d0000 : "linux" <5>0x00100000-0x003d0000 : "rootfs" <5>0x003d0000-0x00400000 : "ddwrt" <5>0x003d0000-0x003e0000 : "nvram" <5>0x003e0000-0x003f0000 : "FIS directory" <5>0x003f0000-0x00400000 : "board_config" <5>0x00000000-0x00400000 : "fullflash" <4>watchdog hb: 60 ISR: 0x20 IMR: 0x8 WD : 0xa270a35d WDC: 0x0 <4>ar2315_wdt_init using heartbeat 60 s cycles 2400000000 <4>watchdog hb: 60 ISR: 0x20 IMR: 0x88 WD : 0x8f07e79b WDC: 0x0 <4>u32 classifier <4> Actions configured <4>Netfilter messages via NETLINK v0.30. <4>nf_conntrack version 0.5.0 (1024 buckets, 4096 max) <4>ctnetlink v0.93: registering with nfnetlink. <6>IPv4 over IPv4 tunneling driver <6>GRE over IPv4 tunneling driver <6>ip_tables: (C) 2000-2006 Netfilter Core Team <5>ClusterIP Version 0.8 loaded successfully <6>TCP bic registered <6>TCP cubic registered <6>TCP westwood registered <6>TCP highspeed registered <6>TCP hybla registered <6>TCP htcp registered <6>TCP vegas registered <6>TCP scalable registered <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <4>Welcome to PF_RING 3.2.1 <4>(C) 2004-06 L.Deri <6>NET: Registered protocol family 27 <4>PF_RING: bucket length 128 bytes <4>PF_RING: ring slots 4096 <4>PF_RING: sample rate 1 [1=no sampling] <4>PF_RING: capture TX No [RX only] <4>PF_RING: transparent mode Yes <4>PF_RING initialized correctly. <4>PF_RING: registered /proc/net/pf_ring/ <6>802.1Q VLAN Support v1.8 Ben Greear <6>All bugs added by David S. Miller <0>decode /dev/mtdblock2 <4>VFS: Mounted root (squashfs filesystem) readonly. <6>Mounted devfs on /dev <6>Freeing unused kernel memory: 124k freed <4>ar2315_wdt: starting watchdog w/timeout 60 seconds <4>watchdog hb: 60 ISR: 0x20 IMR: 0x89 WD : 0x8f0b1444 WDC: 0x0 <4>Algorithmics/MIPS FPU Emulator v1.5 <4>eth0: Atheros AR231x: 00:24:01:1a:b3:1e, irq 4 <6>ar2313_eth_mii: probed <6>eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00) <4>ath_hal: module license 'Proprietary' taints kernel. <6>device vlan0 entered promiscuous mode <6>device eth0 entered promiscuous mode <6>device vlan2 entered promiscuous mode <3>br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. <6>device vlan0 left promiscuous mode <6>device vlan0 entered promiscuous mode <6>br0: port 1(vlan0) entering learning state <6>br0: topology change detected, propagating <6>br0: port 1(vlan0) entering forwarding state <6>device vlan2 left promiscuous mode <6>etherip: Ethernet over IPv4 tunneling driver root@DD-WRT:~# cat /var/log/messages root@DD-WRT:~#


 
Rev.B1 dmesg &  /var/log/messages(空的)

root@DD-WRT:~# dmesg <5>Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.1.2) #969 Sat Oct 10 11:37:40 CEST 2009 <4> <4> The CPU frequency set to 320 MHz <6>32M RAM Detected! <4>CPU revision is: 0001964c <4>Determined physical RAM map: <4> memory: 02000000 @ 00000000 (usable) <7>On node 0 totalpages: 8192 <7> Normal zone: 64 pages used for memmap <7> Normal zone: 0 pages reserved <7> Normal zone: 8128 pages, LIFO batch:0 <7> Movable zone: 0 pages used for memmap <4>Built 1 zonelists in Zone order. Total pages: 8128 <5>Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd <4>Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. <4>Primary data cache 16kB, 4-way, linesize 32 bytes. <6>Synthesized TLB refill handler (20 instructions). <6>Synthesized TLB load handler fastpath (32 instructions). <6>Synthesized TLB store handler fastpath (32 instructions). <6>Synthesized TLB modify handler fastpath (31 instructions). <6>Cache parity protection disabled <4>cause = 20800008, status = 1100ff00 <4>PID hash table entries: 128 (order: 7, 512 bytes) <4>calculating r4koff... 0030d400(3200000) <4>CPU frequency 320.00 MHz <4>Using 160.000 MHz high precision timer. <6>console [ttyS1] enabled <6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) <6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) <6>Memory: 29480k/32768k available (2159k kernel code, 3288k reserved, 320k data, 120k init, 0k highmem) <7>Calibrating delay loop... 212.99 BogoMIPS (lpj=1064960) <4>Mount-cache hash table entries: 512 <6>NET: Registered protocol family 16 <6>Generic PHY: Registered new driver <6>NET: Registered protocol family 2 <6>Time: MIPS clocksource has been installed. <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP established hash table entries: 1024 (order: 1, 8192 bytes) <6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes) <6>TCP: Hash tables configured (established 1024 bind 1024) <6>TCP reno registered <4>Load RT2880 Timer Module(Wdg/Soft) <6>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) <6>devfs: boot_options: 0x1 <6>squashfs: version 3.0 (2006/03/15) Phillip Lougher <6>io scheduler noop registered <6>io scheduler deadline registered (default) <4>Ralink gpio driver initialized <6>Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled <6>serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A <6>serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A <4>rt3052 access driver initialization. <6>PPP generic driver version 2.4.2 <6>PPP Deflate Compression module registered <6>PPP BSD Compression module registered <6>MPPE/MPPC encryption/compression module registered <6>NET: Registered protocol family 24 <6>PPPoL2TP kernel driver, V1.0 <6>tun: Universal TUN/TAP device driver, 1.6 <6>tun: (C) 1999-2004 Max Krasnyansky <5>ralink flash device: 0x1000000 at 0xbf000000 <6>Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank <7>Ralink SoC physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 <7>Ralink SoC physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 <7>Ralink SoC physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 <4> Amd/Fujitsu Extended Query Table at 0x0040 <5>number of CFI chips: 1 <5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. <0> <4>found squashfs at 124000 <5>Creating 6 MTD partitions on "Ralink SoC physically mapped flash": <5>0x00000000-0x00030000 : "uboot" <5>0x00030000-0x00040000 : "uboot-config" <5>0x00040000-0x00050000 : "factory-defaults" <5>0x00050000-0x003f0000 : "linux" <5>0x00124000-0x003f0000 : "rootfs" <4>mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only <5>0x003f0000-0x00400000 : "nvram" <4>u32 classifier <4> Actions configured <4>Netfilter messages via NETLINK v0.30. <4>nf_conntrack version 0.5.0 (1024 buckets, 4096 max) <4>ctnetlink v0.93: registering with nfnetlink. <6>IPv4 over IPv4 tunneling driver <6>GRE over IPv4 tunneling driver <6>ip_tables: (C) 2000-2006 Netfilter Core Team <6>IPP2P v0.8.2 loading <5>ClusterIP Version 0.8 loaded successfully <6>TCP bic registered <6>TCP cubic registered <6>TCP westwood registered <6>TCP highspeed registered <6>TCP hybla registered <6>TCP htcp registered <6>TCP vegas registered <6>TCP scalable registered <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <4>Welcome to PF_RING 3.2.1 <4>(C) 2004-06 L.Deri <6>NET: Registered protocol family 27 <4>PF_RING: bucket length 128 bytes <4>PF_RING: ring slots 4096 <4>PF_RING: sample rate 1 [1=no sampling] <4>PF_RING: capture TX No [RX only] <4>PF_RING: transparent mode Yes <4>PF_RING initialized correctly. <4>PF_RING: registered /proc/net/pf_ring/ <6>802.1Q VLAN Support v1.8 Ben Greear <6>All bugs added by David S. Miller <4>GDMA1_MAC_ADRH -- : 0x00000000 <4>GDMA1_MAC_ADRL -- : 0x00000000 <4>Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500! <4>NAPI enable, weight = 0, Tx Ring = 256, Rx Ring = 256 <4>GDMA1_MAC_ADRH -- : 0x0000000c <4>GDMA1_MAC_ADRL -- : 0x43305077 <1>PROC INIT OK! <0>decode /dev/mtdblock4 <4>VFS: Mounted root (squashfs filesystem) readonly. <6>Mounted devfs on /dev <6>Freeing unused kernel memory: 120k freed <4>rt2860v2_ap: module license 'unspecified' taints kernel. <4>GDMA1_MAC_ADRH -- : 0x00000026 <4>GDMA1_MAC_ADRL -- : 0x5a2b4af6 <4> <4>phy_tx_ring = 0x01c3b000, tx_ring = 0xa1c3b000, size: 16 bytes <4> <4>phy_rx_ring = 0x01c3c000, rx_ring = 0xa1c3c000, size: 16 bytes <4>RT305x_ESW: Link Status Changed <4>GDMA1_FWD_CFG = 10000 <4>RT305x_ESW: Link Status Changed <4>RT305x_ESW: Link Status Changed <3>br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. <4>Algorithmics/MIPS FPU Emulator v1.5 <6>device vlan1 entered promiscuous mode <6>device eth2 entered promiscuous mode <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0! <6>br0: port 1(vlan1) entering learning state <6>device vlan2 entered promiscuous mode <6>device vlan2 left promiscuous mode <6>br0: topology change detected, propagating <6>br0: port 1(vlan1) entering forwarding state <6>etherip: Ethernet over IPv4 tunneling driver <4>nf_nat_pptp: Unknown symbol nf_nat_need_gre root@DD-WRT:~# cat /var/log/messages root@DD-WRT:~#




技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#10 2009-10-21 23:44:48

hippo
天使
註冊日期: 2008-10-07
文章數: 1562
目前積分 :   20 

Re: D-Link DIR-300 A1 & B1 超級比一比

謝謝站長提供的資訊, 看來bootloader也改了.
若要查看/var/log/messages, 請參考[DD-WRT] 系統日誌(System Log)就有訊息產生.


離線

 

相關討論主題

主題 回覆 點閱 最後發表
14 58338 2022-10-13 23:53:04 作者 a24606
0 3469 2019-09-27 09:34:15 作者 krader2000
0 3805 2019-03-15 11:43:16 作者 krader2000
0 5141 2019-01-13 23:24:22 作者 choi
1 5626 2018-12-22 11:34:39 作者 coneflwer

友情連結

論壇頁尾

Powered by PunBB
© Copyright 2018 Rickard Andersson
RSS Feed