數位天堂

用了chmod +w /opt/etc/init.d/S97samba后。再去编辑，还是显示文件只读。我该如何办？谢谢！

你的磁碟分割順序剛好跟我寫的教程相反，所以你必須在所有的程序上要把
/dev/scsi/host0/bus0/target0/lun0/part1
改成
/dev/scsi/host0/bus0/target0/lun0/part2

这是我的经过。
WL-500GP login: admin
Password:
[admin@WL-500GP root]$ killall stupid-ftpd
killall: stupid-ftpd: no process killed
[admin@WL-500GP root]$ umount /tmp/harddisk
[admin@WL-500GP root]$ mkswap /dev/scsi/host0/bus0/target0/lun0/part2
Setting up swapspace version 1, size = 493510656 bytes
[admin@WL-500GP root]$ awapon /dev/scsi/host0/bus0/target0/lun0/part2
-sh: awapon: not found
[admin@WL-500GP root]$ swapon /dev/scsi/host0/bus0/target0/lun0/part2
swapon: /dev/scsi/host0/bus0/target0/lun0/part2: Device or resource busy
[admin@WL-500GP root]$ mke2fs -j /dev/scsi/host0/bus0/target0/lun0/part1
mke2fs 1.38 (30-Jun-2005)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
14598144 inodes, 29184072 blocks
1459203 blocks (5.00%) reserved for the super user
First data block=0
891 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 20 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
[admin@WL-500GP root]$ mount /dev/scsi/host0/bus0/target0/lun0/part1 /opt
[admin@WL-500GP root]$ df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/root                 3072      3072         0 100% /
/dev/scsi/host0/bus0/target0/lun0/part1 114903912    131228 108935872   0% /opt
[admin@WL-500GP root]$ free
              total         used         free       shared      buffers
  Mem:        30164         8340        21824            0          444
Swap:       481940         1208       480732
Total:       512104         9548       502556
[admin@WL-500GP root]$ mkdir /opt/tmp
[admin@WL-500GP root]$ mkdir /opt/tmp/ipkg
[admin@WL-500GP root]$ ipkg.sh update
Downloading http://wl500g.dyndns.org/ipkg/Packages ...
Connecting to wl500g.dyndns.org[158.250.11.254]:80
Packages             100% |*****************************|   754       00:00 ETA
Done.
Updated list of available packages in /opt/lib/ipkg/lists/wl500g
Downloading http://ipkg.nslu2-linux.org/feeds/optwa … e/Packages
...
Connecting to ipkg.nslu2-linux.org[140.211.169.169]:80
Packages             100% |*****************************|   413 KB    00:00 ETA
Done.
Updated list of available packages in /opt/lib/ipkg/lists/optware
[admin@WL-500GP root]$ ipkg.sh install ipkg-opt

Downloading http://ipkg.nslu2-linux.org/feeds/optwa … e/uclibc-o
pt_0.9.28-13_mipsel.ipk ...
Connecting to ipkg.nslu2-linux.org[140.211.169.169]:80
uclibc-opt_0.9.28-13 100% |*****************************|   832 KB    00:00 ETA
Done.
Unpacking uclibc-opt...Done.
Configuring uclibc-opt...Updating /opt/etc/ld.so.cache
Done.

Downloading http://ipkg.nslu2-linux.org/feeds/optwa … e/ipkg-opt
_0.99.163-10_mipsel.ipk ...
Connecting to ipkg.nslu2-linux.org[140.211.169.169]:80
ipkg-opt_0.99.163-10 100% |*****************************| 75796       00:00 ETA
Done.
Unpacking ipkg-opt...Done.
Configuring ipkg-opt...Done.
[admin@WL-500GP root]$ ipkg install nano
Installing nano (2.1.5-1) to /opt/...
Downloading http://ipkg.nslu2-linux.org/feeds/optwa … e/nano_2.1
.5-1_mipsel.ipk
Installing ncurses (5.6-3) to /opt/...
Downloading http://ipkg.nslu2-linux.org/feeds/optwa … e/ncurses_
5.6-3_mipsel.ipk
/opt/etc/init.d/rc.unslung

# Start SSH daemon
dropbear
~
[admin@WL-500GP root]$ flashs save
-sh: flashs: not found
[admin@WL-500GP root]$ flashfs save
tar: Removing leading '/' from member names
tmp/local/
tmp/local/etc/
tmp/local/etc/dropbear/
tmp/local/etc/dropbear/dropbear_rsa_host_key
tmp/local/etc/dropbear/dropbear_dss_host_key
tmp/local/sbin/
tmp/local/sbin/post-firewall
tmp/local/sbin/post-boot
tmp/local/root/
-rw-r--r--    1 admin    root         1515 Oct  7 13:13 /tmp/flash.tar.gz
Check saved image and type "/sbin/flashfs commit" to commit changes
[admin@WL-500GP root]$ flashfs commit
.
Committed.
[admin@WL-500GP root]$ flashfs enable
[admin@WL-500GP root]$

终于改机了。我的网上邻居和改机前一样无法进入。网上邻居见part0 在 WL500g.Premium (Wl500g.premium) 上及part1 在 WL500g.Premium (Wl500g.premium) 上，都不法访问。并且标识都没变。
telnet192.168.1.1。进去看见
WL-500GP login: admin
Password:
[admin@WL-500GP root]$ free
              total         used         free       shared      buffers
  Mem:        30164        21664         8500            0         6920
Swap:       481940            0       481940
Total:       512104        21664       490440
[admin@WL-500GP root]$ fdisk -l

Disk /dev/scsi/host0/bus0/target0/lun0/disc: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

                                 Device Boot    Start       End    Blocks   Id
System
/dev/scsi/host0/bus0/target0/lun0/part1               1       14533   116736291
  83  Linux
/dev/scsi/host0/bus0/target0/lun0/part2           14534       14593      481950
  82  Linux swap


[admin@WL-500GP root]$ ps
  PID  Uid     VmSize Stat Command
    1 admin       644 S   /sbin/init
    2 admin           SW  [keventd]
    3 admin           SWN [ksoftirqd_CPU0]
    4 admin           SW  [kswapd]
    5 admin           SW  [bdflush]
    6 admin           SW  [kupdated]
    7 admin           SW  [mtdblockd]
   59 admin       332 S   telnetd
   65 admin       380 S   httpd vlan1
   66 admin       408 S   syslogd -m 0 -O /tmp/syslog.log -S -l 7
   71 nobody      488 S   [dnsmasq]
   72 admin       364 S   klogd
   77 admin           SW  [khubd]
   86 admin       276 S   lpd
   88 admin       260 S   p9100d -f /dev/usb/lp0 0
   91 admin       340 S   waveservermain
   93 admin       344 S   rcamdmain
   97 admin           SW  [usb-storage-0]
   98 admin           SW  [scsi_eh_0]
  104 admin       700 S   pppd file /tmp/ppp/options.wan0
  107 admin       312 S   infosvr br0
  108 admin       476 S   watchdog
  110 admin       344 S   ntp
  127 admin           SW  [kjournald]
  135 admin      1000 S   /usr/sbin/smbd -D -l /opt/var/log/smbd.log -s /opt/et
  137 admin      1000 S   /usr/sbin/nmbd -D -n WL500GP -o -l /tmp -s /opt/etc/s
  140 admin       468 S   dropbear
  150 admin       444 S   upnp -D -L br0 -W ppp0
  152 admin       548 S   -sh
  158 admin       396 R   ps
改机后重启。但是网上邻居仍然是见part0 在 WL500g.Premium (Wl500g.premium) 上及part1 在 WL500g.Premium (Wl500g.premium) 上，都不法访问。
能不能告诉我可能问题出在那里？谢谢版主。

是下面这段吗？
編輯 SAMBA 設定檔


$ nano /opt/etc/samba/smb.conf

內容：


[global]
workgroup = Workgroup
guest account = admin
security = share
browseable = yes
guest ok = yes
guest only = no
log level = 1
max log size = 100
encrypt passwords = yes
dns proxy = no

[Share]
path=/opt/share
writeable = yes
browseable = yes

[USB]
path=/tmp/mnt/disc1
writeable = yes
browseable = yes
我是用VI编辑的。我不会NANO
我可能哪里错了？谢谢！