數位天堂

麻烦版主能不能把CPU负载的方法也帖出来。谢谢

我已經照版主的方法去安裝....而且也用free查過....空間都夠啊!!!
不曉得為什麼MRTG...還是開不起來.....不知IE or Firefox....要調整什麼嘛!!
麻煩Aven....解惑
感恩~~~

好像失敗了

admin@WL-001E8CBB2C5E[/tmp/local/root]:cfgmaker public@192.168.1.1  > /opt/shar
/www/mrtg/mrtg.cfg

SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.1.1" [192.168.1.1].161)
                  community: "public"
                 request ID: -1106656709
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
at /opt/bin/../lib/mrtg2/SNMP_util.pm line 629
SNMPWALK Problem for 1.3.6.1.2.1.1 on public@192.168.1.1::::::v4only
at /opt/bin/cfgmaker line 950
WARNING: Skipping public@192.168.1.1: as no info could be retrieved

admin@WL-001E8CBB2C5E[/tmp/local/root]:
admin@WL-001E8CBB2C5E[/tmp/local/root]:mrtg /opt/share/www/mrtg/mrtg.cfg
Use of uninitialized value in concatenation (.) or string at /opt/bin/mrtg line
2530.
Use of uninitialized value in concatenation (.) or string at /opt/bin/mrtg line
2530.
Use of uninitialized value in concatenation (.) or string at /opt/bin/mrtg line
2548.
Use of uninitialized value in concatenation (.) or string at /opt/bin/mrtg line
2548.
Use of uninitialized value in concatenation (.) or string at /opt/bin/mrtg line
2564.
Use of uninitialized value in concatenation (.) or string at /opt/bin/mrtg line
2564.
ERROR: "WorkDir" not specified in mrtg config file
admin@WL-001E8CBB2C5E[/tmp/local/root]:

Aven 提到:

最後，要在 mrtg.cfg 裡加上一行 "WorkDir: /opt/share/www/mrtg"

進去只有看到MRTG INDEX PAGE還有MRTG的圖
沒有流量統計圖.......
大概是最後一步出問題

admin@WL-001E8CBB2C5E[/opt]:*/5 * * * * admin mrtg /opt/share/www/mrtg/mrtg.cfg
-sh: */5: not found
admin@WL-001E8CBB2C5E[/opt]:

請教一個小問題

mrtg流量圖最新的是在左邊
怎樣把最新的流量換到右邊
這樣看的比較習慣