數位天堂

Nokia:科技始終來自於人性; 拜耳:如果文明不能使我們更相愛,那科技便失去意義!
歡迎您的加入,讓我們一起討論科技與環保的整合應用...

您尚未登入。

#1 2009-04-16 11:21:22

ypyp1015
新生
註冊日期: 2009-04-16
文章數: 1
目前積分 :   

求助~WL-500GPV2 設定3.5G 中華電信E169網卡

近來敗IPhone,搭贈的門號想說用來分享網路,因家裡訊號不好,想到用AP的方式來接收訊號再發出來
一來速度快,二來可多台電腦無線接收
依大大們介紹的機器~購入了WL-500GPV2也更新了AP
刷了WL500gpV2-1.9.2.7-10-USB-1.71.trx
接下來的設定,卻一直都設定失敗~主要是燈號都一直給我閃爍閃爍~不恆亮壓!!
門號:中華電信 關閉PIN:0000
網卡:CHT E169
AP:ASUS WL-500GPV2
以下是我詳細的操作步驟.可否有大大能告知我哪裡做錯了呢?設備應該也都是對的吧!!
我看不太懂紀錄檔~所以有附上,若還缺甚麼資訊可幫助的我會很願意提供><"

更新韌體後
Factory Default -> Restore (還原預設值??)
IP Config -> WAN & LAN -> WAN Connection Type:USB Connection (預設)
USB Connection(CDMA) -> Connection Mode -> 勾選 Use WAN port as LAN,Yes  (也試過設成no)
                       選擇GPRS/EDGE/UMTS
Apply(套用??)
USB Connection(PRS/EDGE/UMTS) -> PRS/EDGE/UMTS Config ->APN:internet
                            Dial Number:*99#
                            USB speed:460800
                            Modem type:Huawei E169
Apply(套用??)
Finish->Save&Restart

USB Connection(PRS/EDGE/UMTS) -> PRS/EDGE/UMTS Config -> Connect (連接??)

連接後燈號還是閃爍(藍色)沒有恆亮過.

System Log

Jan  1 01:00:04 syslogd started: BusyBox v1.1.3
Jan  1 01:00:04 kernel: 0x000b8f50-0x007f0000 : "rootfs"
Jan  1 01:00:04 kernel: 0x007f0000-0x00800000 : "nvram"
Jan  1 01:00:04 kernel: 0x003c0000-0x007f0000 : "flashfs"
Jan  1 01:00:04 kernel: sflash: found no supported devices
Jan  1 01:00:04 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan  1 01:00:04 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan  1 01:00:04 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan  1 01:00:04 kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan  1 01:00:04 kernel: Linux IP multicast router 0.06 plus PIM-SM
Jan  1 01:00:04 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
Jan  1 01:00:04 kernel: ip_conntrack_pptp version 1.9 loaded
Jan  1 01:00:04 kernel: ip_nat_pptp version 1.5 loaded
Jan  1 01:00:04 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan  1 01:00:04 kernel: ipt_time loading
Jan  1 01:00:04 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan  1 01:00:04 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan  1 01:00:04 kernel: 802.1Q VLAN Support v1.7 Ben Greear
Jan  1 01:00:04 kernel: All bugs added by David S. Miller
Jan  1 01:00:04 kernel: FAT: bogus logical sector size 36096
Jan  1 01:00:04 kernel: FAT: bogus logical sector size 36096
Jan  1 01:00:04 kernel: NTFS: Unable to set blocksize 512.
Jan  1 01:00:04 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 01:00:04 kernel: Mounted devfs on /dev
Jan  1 01:00:04 kernel: Freeing unused kernel memory: 68k freed
Jan  1 01:00:04 kernel: Executing /linuxrc
Jan  1 01:00:04 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  1 01:00:04 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
Jan  1 01:00:04 kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.29
Jan  1 01:00:04 kernel: device eth0 entered promiscuous mode
Jan  1 01:00:04 kernel: device vlan0 entered promiscuous mode
Jan  1 01:00:04 kernel: device eth1 entered promiscuous mode
Jan  1 01:00:04 kernel: device vlan1 entered promiscuous mode
Jan  1 01:00:04 kernel: br0: port 3(vlan1) entering listening state
Jan  1 01:00:04 kernel: br0: port 2(eth1) entering listening state
Jan  1 01:00:04 kernel: br0: port 1(vlan0) entering listening state
Jan  1 01:00:04 kernel: br0: port 3(vlan1) entering learning state
Jan  1 01:00:04 kernel: br0: port 2(eth1) entering learning state
Jan  1 01:00:04 kernel: br0: port 3(vlan1) entering forwarding state
Jan  1 01:00:04 kernel: br0: topology change detected, propagating
Jan  1 01:00:04 kernel: br0: port 2(eth1) entering forwarding state
Jan  1 01:00:04 kernel: br0: topology change detected, propagating
Jan  1 01:00:04 kernel: br0: port 1(vlan0) entering learning state
Jan  1 01:00:04 kernel: br0: port 1(vlan0) entering forwarding state
Jan  1 01:00:04 kernel: br0: topology change detected, propagating
Jan  1 01:00:04 kernel: usb.c: registered new driver usbdevfs
Jan  1 01:00:04 kernel: usb.c: registered new driver hub
Jan  1 01:00:04 kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan  1 01:00:04 kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan  1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan  1 01:00:04 kernel: Product: USB OHCI Root Hub
Jan  1 01:00:04 kernel: SerialNumber: b8003000
Jan  1 01:00:04 kernel: hub.c: USB hub found
Jan  1 01:00:04 kernel: hub.c: 2 ports detected
Jan  1 01:00:05 kernel: hub.c: new USB device 00:03.0-1, assigned address 2
Jan  1 01:00:05 kernel: hub.c: USB hub found
Jan  1 01:00:05 kernel: hub.c: 2 ports detected
Jan  1 01:00:06 kernel: hub.c: new USB device 00:03.0-1.1, assigned address 3
Jan  1 01:00:06 kernel: Manufacturer: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Jan  1 01:00:06 kernel: Product: HUAWEI Mobile
Jan  1 01:00:06 kernel: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Jan  1 01:00:06 kernel: usb.c: USB device 3 (vend/prod 0x12d1/0x1001) is not claimed by any active driver.
Jan  1 01:00:06 kernel:   Length              = 18
Jan  1 01:00:06 kernel:   DescriptorType      = 01
Jan  1 01:00:06 kernel:   USB version         = 1.10
Jan  1 01:00:06 kernel:   Vendor:Product      = 12d1:1001
Jan  1 01:00:06 kernel:   MaxPacketSize0      = 64
Jan  1 01:00:06 kernel:   NumConfigurations   = 1
Jan  1 01:00:06 kernel:   Device version      = 0.00
Jan  1 01:00:06 kernel:   Device Class:SubClass:Protocol = 00:00:00
Jan  1 01:00:06 kernel:     Per-interface classes
Jan  1 01:00:06 kernel: Configuration:
Jan  1 01:00:06 kernel:   bLength             =    9
Jan  1 01:00:06 kernel:   bDescriptorType     =   02
Jan  1 01:00:06 kernel:   wTotalLength        = 006c
Jan  1 01:00:06 kernel:   bNumInterfaces      =   04
Jan  1 01:00:06 kernel:   bConfigurationValue =   01
Jan  1 01:00:06 kernel:   iConfiguration      =   00
Jan  1 01:00:06 kernel:   bmAttributes        =   a0
Jan  1 01:00:06 kernel:   MaxPower            =  500mA
Jan  1 01:00:06 kernel:
Jan  1 01:00:06 kernel:   Interface: 0
Jan  1 01:00:06 kernel:   Alternate Setting:  0
Jan  1 01:00:06 kernel:     bLength             =    9
Jan  1 01:00:06 kernel:     bDescriptorType     =   04
Jan  1 01:00:06 kernel:     bInterfaceNumber    =   00
Jan  1 01:00:06 kernel:     bAlternateSetting   =   00
Jan  1 01:00:06 kernel:     bNumEndpoints       =   03
Jan  1 01:00:06 kernel:     bInterface Class:SubClass:Protocol =   ff:ff:ff
Jan  1 01:00:06 kernel:     iInterface          =   03
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   81 (in)
Jan  1 01:00:06 kernel:       bmAttributes        =   03 (Interrupt)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0010
Jan  1 01:00:06 kernel:       bInterval           =   80
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   82 (in)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   02 (out)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:
Jan  1 01:00:06 kernel:   Interface: 1
Jan  1 01:00:06 kernel:   Alternate Setting:  0
Jan  1 01:00:06 kernel:     bLength             =    9
Jan  1 01:00:06 kernel:     bDescriptorType     =   04
Jan  1 01:00:06 kernel:     bInterfaceNumber    =   01
Jan  1 01:00:06 kernel:     bAlternateSetting   =   00
Jan  1 01:00:06 kernel:     bNumEndpoints       =   02
Jan  1 01:00:06 kernel:     bInterface Class:SubClass:Protocol =   ff:ff:ff
Jan  1 01:00:06 kernel:     iInterface          =   03
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   84 (in)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   03 (out)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:
Jan  1 01:00:06 kernel:   Interface: 2
Jan  1 01:00:06 kernel:   Alternate Setting:  0
Jan  1 01:00:06 kernel:     bLength             =    9
Jan  1 01:00:06 kernel:     bDescriptorType     =   04
Jan  1 01:00:06 kernel:     bInterfaceNumber    =   02
Jan  1 01:00:06 kernel:     bAlternateSetting   =   00
Jan  1 01:00:06 kernel:     bNumEndpoints       =   02
Jan  1 01:00:06 kernel:     bInterface Class:SubClass:Protocol =   ff:ff:ff
Jan  1 01:00:06 kernel:     iInterface          =   03
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   85 (in)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   05 (out)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:
Jan  1 01:00:06 kernel:   Interface: 3
Jan  1 01:00:06 kernel:   Alternate Setting:  0
Jan  1 01:00:06 kernel:     bLength             =    9
Jan  1 01:00:06 kernel:     bDescriptorType     =   04
Jan  1 01:00:06 kernel:     bInterfaceNumber    =   03
Jan  1 01:00:06 kernel:     bAlternateSetting   =   00
Jan  1 01:00:06 kernel:     bNumEndpoints       =   02
Jan  1 01:00:06 kernel:     bInterface Class:SubClass:Protocol =   08:06:50
Jan  1 01:00:06 kernel:     iInterface          =   00
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   83 (in)
Jan  1 01:00:06 kernel:       bmAttributes        =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:06 kernel:     Endpoint:
Jan  1 01:00:06 kernel:       bLength             =    7
Jan  1 01:00:06 kernel:       bDescriptorType     =   05
Jan  1 01:00:06 kernel:       bEndpointAddress    =   04 (out)
Jan  1 01:00:06 kernel: =   02 (Bulk)
Jan  1 01:00:06 kernel:       wMaxPacketSize      = 0040
Jan  1 01:00:06 kernel:       bInterval           =   00
Jan  1 01:00:07 kernel: usb.c: registered new driver usblp
Jan  1 01:00:07 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan  1 01:00:08 kernel: Linux video capture interface: v1.00
Jan  1 01:00:08 kernel: SCSI subsystem driver Revision: 1.00
Jan  1 01:00:09 kernel: Initializing USB Mass Storage driver...
Jan  1 01:00:09 kernel: usb.c: registered new driver usb-storage
Jan  1 01:00:09 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 01:00:09 kernel:   Vendor: HUAWEI    Model: Mass Storage      Rev: 2.31
Jan  1 01:00:09 kernel:   Type:   CD-ROM                             ANSI SCSI revision: 02
Jan  1 01:00:09 kernel: USB Mass Storage support registered.
Jan  1 01:00:10 kernel: usb.c: registered new driver acm
Jan  1 01:00:10 kernel: acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters (patched)
Jan  1 01:00:10 kernel: usb.c: registered new driver serial
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for Generic
Jan  1 01:00:10 kernel: usbserial.c: USB Serial Driver core v1.4
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for Modem
Jan  1 01:00:10 kernel: modem.c: GSM/CDMA modem driver v0.1
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for PL-2303
Jan  1 01:00:10 kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Jan  1 01:00:10 kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Jan  1 01:00:10 kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
Jan  1 01:00:17 pppd[154]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'
             
USB Devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 11/900 us ( 1%), #Int=  1, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB OHCI Root Hub
S:  SerialNumber=b8003000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0424 ProdID=2502 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1001 Rev= 0.00
S:  Manufacturer=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
S:  Product=HUAWEI Mobile
S:  SerialNumber=ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms



最後修改: ypyp1015 (2009-04-16 11:29:30)


離線

 

#2 2009-04-16 21:27:12

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: 求助~WL-500GPV2 設定3.5G 中華電信E169網卡

以下是我的設定,你參考看看
GPRS/EDGE/UMTS Config:
GPRS

Username:username
Password:password
APN:internet   
Dial Number (usually *99***1#):*99***#   
USB device serial speed (usually 115200):460800   
USB device location ID:   
Custom USB device parameters
USB device Vendor ID (0xabcd):0x12d1   
USB device Product ID (0xefgh):0x1001   
USB device packet size (0 for default):0   
Zero CD Configuration
Modem type:Huawei E169




技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#3 2009-04-17 11:52:10

allengran
精靈
註冊日期: 2009-03-24
文章數: 239
目前積分 :   

Re: 求助~WL-500GPV2 設定3.5G 中華電信E169網卡

我的設定是
GPRS/EDGE/UMTS Config:
GPRS
Username:空白
Password:空白
APN:internet   
Dial Number (usually *99***1#):*99#   
USB device serial speed (usually 115200):460800   
USB device location ID:空白

Custom USB device parameters

USB device Vendor ID (0xabcd):空白
USB device Product ID (0xefgh):空白
USB device packet size (0 for default):0   

Zero CD Configuration
Modem type:Huawei E220, E270, E870


離線

 

#4 2009-04-21 21:47:46

juhn1201
新生
註冊日期: 2009-02-26
文章數: 3
目前積分 :   

Re: 求助~WL-500GPV2 設定3.5G 中華電信E169網卡

試試要拔下無線網卡時,要先把MOBILE程式將網卡改成3G優先 cool


離線

 

#5 2009-04-21 23:14:47

hippo
天使
註冊日期: 2008-10-07
文章數: 1562
目前積分 :   20 

Re: 求助~WL-500GPV2 設定3.5G 中華電信E169網卡

allengran 提到:

(恕刪)
Modem type:Huawei E220, E270, E870

選用E169



離線

 

相關討論主題

主題 回覆 點閱 最後發表
1 8593 2011-05-04 10:09:59 作者 hippo

友情連結

論壇頁尾

Powered by PunBB
© Copyright 2018 Rickard Andersson
RSS Feed