#1 2010-09-07 00:36:51
[開箱報告] ZyXEL NSA-210
話說上個月看到ZyXEL NSA-210搭1TB硬碟特賣，不知為何彷彿看到 Apple Mac mini 標錯價一般見獵心喜，所以並沒有多做考慮就下單了，事後心想會不會是已拆封的退貨再組合後低價出清? 算了，還是別庸人自擾，難得如此低價先搶進一台再說，若真的不滿意的話，到貨後還有七天的鑑賞期可以好好鑑賞一番。
收到貨後，滿心期待打開來看，全都是未拆封商品，已經可以放心一半了。
快速組裝後，開機登場
韌體版本：V3.20(AFD.0)
即時狀態顯示
支援RSS讀取
內建支援USB碟複製到NAS基本功能，另外還支援了NAS及USB碟之間的雙向同步功能
除了支援FTP自動上傳，還可以Flickr及Youtube自動上傳功能
ZyXEL 也搞出一套適用旗下NAS的外掛套件，就稱作 Zpkg
Beta版韌體
參考 Telnet backdoor 取得Telnet 密碼
1.下載makekey
2.拿到ARM linux主機下執行，命令列格式 makekey mac_address 輸出密碼
ds209> ./makekey AA:BB:BB:DD:EE:FF
XXXXXXXX
XXXXXXXX 就是密碼
Telnet 進入
帳號：NsaRescueAngel
密碼：XXXXXXXX
nsa210 login: NsaRescueAngel
Password:
BusyBox v1.1.1 (2009.07.03-16:57+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
OS版本
# uname -a
Linux nsa210 2.6.24.4 #1 Sat Jul 4 00:54:26 CST 2009 armv5tejl unknown
CPU info
# cat /proc/cpuinfo
Processor : ARM926EJ-S rev 5 (v5l)
BogoMIPS : 183.09
Features : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant : 0x0
CPU part : 0x926
CPU revision : 5
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format C
Cache format : Harvard
I size : 32768
I assoc : 4
I line length : 32
I sets : 256
D size : 32768
D assoc : 4
D line length : 32
D sets : 256
Hardware : Oxsemi NAS
Revision : 0000
Serial : 00000b01fdae6540
Memory info
# cat /proc/meminfo
MemTotal: 126344 kB
MemFree: 7968 kB
Buffers: 14020 kB
Cached: 76556 kB
SwapCached: 0 kB
Active: 32116 kB
Inactive: 75900 kB
SwapTotal: 524280 kB
SwapFree: 524280 kB
Dirty: 12 kB
Writeback: 0 kB
AnonPages: 17476 kB
Mapped: 13632 kB
Slab: 5048 kB
SReclaimable: 1960 kB
SUnreclaim: 3088 kB
PageTables: 1012 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 587452 kB
Committed_AS: 255172 kB
VmallocTotal: 253952 kB
VmallocUsed: 4680 kB
VmallocChunk: 241660 kB
DF
# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/ram0 7931 3809 4122 48% /
none 7931 2869 5062 36% /dev/pts
/dev/mtdblock4 48 28 20 58% /zyxel/mnt/info
/dev/sda1 497829 464688 7439 98% /zyxel/mnt/sysdisk
/dev/loop0 71395 63933 7462 90% /ram_bin
/dev/loop0 71395 63933 7462 90% /usr
/dev/loop0 71395 63933 7462 90% /sbin
/dev/loop0 71395 63933 7462 90% /bin
/dev/loop0 71395 63933 7462 90% /lib
/dev/ram3 7931 2869 5062 36% /tmp
/dev/ram3 7931 2869 5062 36% /var
/dev/ram3 7931 2869 5062 36% /home
/dev/ram3 7931 2869 5062 36% /mnt
/dev/ram3 7931 2869 5062 36% /etc
/dev/ram3 7931 2869 5062 36% /dev
/dev/ram3 7931 2869 5062 36% /usr/local/etc
/dev/ram3 7931 2869 5062 36% /usr/local/var
/dev/ram3 7931 2869 5062 36% /usr/local/dmsf
/dev/mtdblock3 448 220 228 49% /etc/zyxel
/dev/ram3 7931 2869 5062 36% /i-data
/dev/ram3 7931 2869 5062 36% /e-data
/dev/md0 390063616 533004 389530612 0% /i-data/cc0eb6b0
/dev/md0 390063616 533004 389530612 0% /usr/local/zy-pkgs
/dev/md0 390063616 533004 389530612 0% /etc/zyxel/zy-pkgs
/dev/md0 390063616 533004 389530612 0% /usr/local/apache/htdocs/pkg
dmesg
# dmesg
ed new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 4096K
Probing for Synopsis GMAC, unit 0
eth0: PHY is ICPlus 1001
eth0: GMAC ver = 51, vendor ver = 17 at 0xe8000000, IRQ 8
eth0: Found PHY at address 1, type 0x02430d90 -> 10/100/1000
eth0: Ethernet addr: 00:30:e0:00:00:00
thermAndFan: initializing - ox810
LED_SET_CTL_IOC_NUM= 6702
red_led_reg = 1b
green_led_reg = 16
red_led_reg = 18
green_led_reg = 21
red_led_reg = 1c
green_led_reg = 1a
red_led_reg = 20
green_led_reg = 1f
red_led_reg = 0
green_led_reg = 9
Init led blk
Enable Interrupt
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.9)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x44900000 (irq = 29) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ox810sata: OX810 sata core.
scsi0 : oxnassata
ata1: SATA max UDMA/133 irq 18
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ox810sata_bmdma_stop - aborting DMA
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 1 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
ata1.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: Drive reports diagnostics failure. This may indicate a drive
ata1.00: fault or invalid emulation. Contact drive vendor for information.
ata1.00: configured for UDMA/133
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access WDC WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ox810sata: OX810 sata core.
scsi1 : oxnassata
ata2: SATA max UDMA/133 irq 18
ata2: SATA link down (SStatus 0 SControl 300)
physmap platform flash device: 00400000 at 41000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
7 cmdlinepart partitions found on MTD device physmap-flash.0
Creating 7 MTD partitions on "physmap-flash.0":
0x00000000-0x00020000 : "uboot"
mtd: Giving out device 0 to uboot
0x00020000-0x001e0000 : "kernel"
mtd: Giving out device 1 to kernel
0x001e0000-0x00380000 : "initrd"
mtd: Giving out device 2 to initrd
0x00380000-0x003f0000 : "etc"
mtd: Giving out device 3 to etc
0x003f0000-0x003fc000 : "empty"
mtd: Giving out device 4 to empty
0x003fc000-0x003fe000 : "env1"
mtd: Giving out device 5 to env1
0x003fe000-0x00400000 : "env2"
mtd: Giving out device 6 to env2
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver@e7000000 Device ID register 42fa05
oxnas-ehci oxnas-ehci.0: OXNAS EHCI Host Controller
oxnas-ehci oxnas-ehci.0: new USB bus registered, assigned bus number 1
oxnas-ehci oxnas-ehci.0: irq 7, io mem 0x00000000
oxnas-ehci oxnas-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
usb 1-1: new high speed USB device using oxnas-ehci and address 2
In hub_port_init, and number is 0, retry 0, port 1 .....
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
pcf8563 0-0051: chip found, driver version 0.4.2
pcf8563 0-0051: rtc core: registered pcf8563 as rtc0
OXNAS bit-bash I2C driver initialisation OK
md: linear personality registered for level -1
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFP support v0.3: not present
drivers/rtc/hctosys.c: unable to open rtc device (rtc)
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 120K
MTD_open
MTD_read
MTD_read
MTD_close
MTD_open
MTD_read
MTD_read
MTD_close
egiga0: PHY is ICPlus 1001
Resetting GMAC
GMAC reset complete
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
MTD_open
MTD_read
MTD_read
MTD_close
MTD_open
MTD_read
MTD_read
MTD_close
egiga0: PHY is ICPlus 1001
egiga0: link down
egiga0: link up, 100Mbps, full-duplex, using pause, lpa 0x45E1
Timed out of wait for Tx to stop
SGI XFS with large block numbers, no debug enabled
SGI XFS Quota Management subsystem
NTFS driver 2.1.29 [Flags: R/O MODULE].
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
md: md0 stopped.
md: bind＜sda2>
Filesystem "md0": Disabling barriers, not supported by the underlying device
XFS mounting filesystem md0
Ending clean XFS mount for filesystem: md0
Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-1 extents:1 across:524280k
ioctl input num = 6701
GPIO_READ_IOC_NUM = 671f
ioctl input num = 6702
GPIO_READ_IOC_NUM = 671f
ioctl input num = 6720
GPIO_READ_IOC_NUM = 671f
ioctl input num = 6702
GPIO_READ_IOC_NUM = 671f
GPIO A status = 2
Interrupt A triggered
Reset button
Reset button press
Reset button press
Beep
Reset button press
Reset button press
Reset button press
Reset button press
Beep
Reset button released
Open backdoor ...
CPU Benchmark
./cpubench
This is CPU and memory benchmark for OpenWRT v0.6. This will then take some time... (typically 30-60 seconds on a 200MHz computer)
Overhead for getting time: 5us
Time to run memory bench: 4.73[secs]
Time to run computation of pi (2400 digits, 10 times): 18.64[secs]
Time to run computation of e (9009 digits): 19.02[secs]
Time to run float bench: 0.19[secs]
Total time: 42.6s
本來這一篇算是隱藏版開箱文，因為上一批特價好像只有我自己下單，沒有其他同好可以討論，所以並沒打算公開。而上週開始的這一波特價，本站已有人受不了低價誘惑跟著敗，所以這篇文章才有機會浮上版面，希望大家藉此可以互相交流一下，如何讓 NSA-210 價值可以遠勝過價格。
技術問題請於論壇上集眾人之力公開討論，感恩
離線
，可是telnet密碼還要用另一台arm機器才能跑出來，就
#5 2010-09-07 17:15:44
Re: [開箱報告] ZyXEL NSA-210
由於新版界面的韌體本身內定不啟動Backdoor~
所以有想要亂亂搞的都沒有慾望換新版韌體~
後來逛了一下友站~
發現這篇文章，有Zyxel兄弟機(NSA-220)開啟backdoor的方式~
http://www.mobile01.com/topicdetail.php … 367912&p=1
我猜NSA-210新版韌體應該也是用這種方式來啟動backdoor~
只是..PORT有可能移走了....
我試了一下~
沒反應..=.=
但嗶第2聲後放開確定系統沒有任何影響....
IP不變、設定都在..
所以應該有機會是開backdoor的按鍵..
只是..PORT在那呢....
==============================================
換回來官網上最新的3.21版~
backdoor的開啟方式確實變為上面說的按reset才開啟的方式~
個人認為這樣比較安全~
離線
#6 2010-09-07 17:41:55
Re: [開箱報告] ZyXEL NSA-210
上面不就有寫進入backdoor的方式了嗎？還是有更新的軔體？
http://zyxel.nas-central.org/wiki/Telnet_backdoor
hannahmo 提到:
由於新版界面的韌體本身內定不啟動Backdoor~
所以有想要亂亂搞的都沒有慾望換新版韌體~
後來逛了一下友站~
發現這篇文章，有Zyxel兄弟機(NSA-220)開啟backdoor的方式~
http://www.mobile01.com/topicdetail.php … 367912&p=1
我猜NSA-210新版韌體應該也是用這種方式來啟動backdoor~
只是..PORT有可能移走了....
我試了一下~
沒反應..=.=
但嗶第2聲後放開確定系統沒有任何影響....
IP不變、設定都在..
所以應該有機會是開backdoor的按鍵..
只是..PORT在那呢....
==============================================
換回來官網上最新的3.21版~
backdoor的開啟方式確實變為上面說的按reset才開啟的方式~
個人認為這樣比較安全~
離線
#7 2010-09-07 18:05:41
Re: [開箱報告] ZyXEL NSA-210
嗯~
剛剛仔細看了~
有寫沒錯....
我一直以為backdoor是一直開著的....
tyyen 提到:
上面不就有寫進入backdoor的方式了嗎？還是有更新的軔體？
http://zyxel.nas-central.org/wiki/Telnet_backdoor
離線
#9 2010-09-08 00:02:00
Re: [開箱報告] ZyXEL NSA-210
Aven 提到:
Beta版韌體
https://digiland.tw/uploads/2_zyxel_nsa210_newgui.jpg
而上週開始的這一波特價，本站已有人受不了低價誘惑跟著敗，所以這篇文章才有機會浮上版面，希望大家藉此可以互相交流一下，如何讓 NSA-210 價值可以遠勝過價格。
我就是受到站大勸敗 栽入這波購物潮...
今天收到商品了 (同時發現3999不見了...變成4699)
迫不急待拆封、裝上硬碟、灌入韌體...
耶? 開機成功...
很好... 找到韌體升級選項... 噹噹噹... 立刻變成測試版韌體
先用用看漂亮介面的測試版韌體幾天
看有沒有問題 Q_Q
離線
相關討論主題
| 主題 | 回覆 | 點閱 | 最後發表 |
|---|---|---|---|
|
[開箱] QNAP TS-221 及 QTS 4.0 開箱報告 作者 Aven
|
7 | 43462 | 2017-12-07 15:24:13 作者 wryi0630 |
|
ZyXEL ES-108S 8埠交換器 作者 happyaaa
|
1 | 7762 | 2015-09-22 17:09:25 作者 happyg |
|
Zyxel NBG-5715 DualBand 同步傳輸機種新選項? 作者 cts1628
|
2 | 15059 | 2012-05-21 10:38:53 作者 livilivilivi |
| 0 | 11988 | 2011-09-03 12:15:50 作者 ardayang | |
|
|
27 | 92403 | 2011-02-02 13:12:36 作者 allengran |
