數位天堂

我已经刷回了官方的固件了，用TFTP老是提示超时，郁闷。。。

TFTP tools
With TFTP, all of the information about the transfer is specified during the initial command/setup; there is very little client/server interaction compared with standard FTP.

[edit] Windows
You can use a command line client, its quite easy really - or you can choose to use a GUI version. Different windows TFTP options are listed below.

WinXP - Command Line TFTP:
tftp client is enabled in the default installation of WinXP
Vista/Win7 - Command Line TFTP:
You need to enable it in Control Panel -> Programs and Features ->
Windows Features -> check mark : TFTP Client
Simple Windows GUI TFTP Utility: Windows GUI TFTP Utility
Quick user guide:
- The Server/IP address is that of the router being flashed. Typically 192.168.1.1
- Leave the Password blank.
- Navigate and select the firmware file you wish to flash.
- Set retries to 10.
No-nonsens open source TFTP tool, Tftpd32 includes TFTP client as well as DHCP, TFTP, SNTP and Syslog servers

最後修改： czp830506 (2010-12-10 08:45:58)

我整过，弄来弄去都刷不进去。最后放弃，如果有什么好方法介绍下。

sunriseyuen 提到:

我整过，弄来弄去都刷不进去。最后放弃，如果有什么好方法介绍下。

用TFTP刷 2.6核心的10.03 ，看到WLHDD网线那的小灯一亮，马上刷，一般能刷进去。

現役路由器無WL-HDD, 且僅測試過X-Wrt 8.09 K24, 非OpenWrt 10.03 K26, 與您的版本不符. 要再找時間測試其他版本.

你下载个TFTP的小软件啊，专门刷ROM的，为了提高成功率你也可以同时 运行 CMD 然后 ping -t -w 1000 192.168.1.1 和 ping -t -w 1000 192.168.1.220，第一次看到PING通时马上运行软件的UPDATE按钮。用这种方法偶刷了DD TOMATO OPENWRT无数次，就算刷成砖头也可以刷回来

最後修改： czp830506 (2010-12-12 22:47:23)