#1 2007-11-06 00:25:01
Oleg新版 firmware 1.9.2.7-8出爐
Download 1.9.2.7-8 (2007-10-30)
Changes:
1. Patched to WL-500W 1.9.8.5 firmware base code (New drivers for wl and et: 4.108.9.0)
2. Added support for WL500W
3. Added support for WL320gE/gP, additional lights are not supported (use WL550gE firmware)
4. Added a handling for DHCP supplied routes (Use Route page to enable/disable)
5. Multicast/IPTV: no longer need routes to be specified, cleaned up igmp logs
6. It's now possible to specify DNS server IP address in the AP mode (added to IP Config page)
7. Added new flashfs option: try 'flashfs enabled' to enable flashfs loading forever
8. Added new http://ipkg.nslu2-linux.org/feeds/optwa … oss/stable repository: use 'ipkg.sh install ipkg-opt' during initial ipkg installation
9. Fixed PPPoE clamping code (set Maximum Segment Size to actual MTU)
10. L2TP: server name resolution, persist/reconnect fixes
11. NFS: added statd for proper locking
12. SMB: Server string, new r/w share mode
13. /etc/fstab: swapon and post-mount called now properly
14. USB storage detection should work correctly for Philips mass storage devices
15. /proc/cpuinfo now reports CPU model, revision and packaging options
16. Changed connection tracking TCP timeout to 6 hours vs. 5 days
17. Some WL-HDD IDE fixes
18. Yet more fixes for built-in flash support (WL-500gP, WL-500W)
19. Some minor kernel fixes
1.9.2.7-8 firmwares (browse directory to find out yours)
1.9.2.7-8 sources (12657397 bytes)
Windows XP users: check this MS KB 893357 article if you've delays/problems with WiFi connection.
技術問題請於論壇上集眾人之力公開討論,感恩
離線
#2 2007-11-06 13:05:37
離線
#3 2007-11-06 13:15:38
Re: Oleg新版 firmware 1.9.2.7-8出爐
eiki 提到:
WL-HDD直接更新,用下来没感觉有区别
看起來並沒有重大的修正,所以我沒打算更新。
原來 ipkg 核心函式庫修改指向 http://ipkg.nslu2-linux.org/feeds/optwa … oss/stable ,這部分我已經在安裝MySQL時已經更新過了,這部份的更新效果比較顯著
技術問題請於論壇上集眾人之力公開討論,感恩
離線
#4 2007-11-06 14:15:24
Re: Oleg新版 firmware 1.9.2.7-8出爐
Aven 提到:
eiki 提到:
WL-HDD直接更新,用下来没感觉有区别
看起來並沒有重大的修正,所以我沒打算更新。
原來 ipkg 核心函式庫修改指向 http://ipkg.nslu2-linux.org/feeds/optwa … oss/stable ,這部分我已經在安裝MySQL時已經更新過了,這部份的更新效果比較顯著
这个是重要啊,最当初内地根本连不上DYNDNS,我只能手动修改HOSTS文件里面手动指定IP地址,还是用VI命令的,弄了好久才装起IPKG,后来的就简单了,残念……
離線
相關討論主題
主題 | 回覆 | 點閱 | 最後發表 |
---|---|---|---|
2 | 8716 | 2018-11-22 21:00:01 作者 ulul5201 | |
基於官方韌體開源修正的Custom Firmware 作者 hannahmo
|
3 | 16207 | 2018-11-15 10:28:20 作者 con16 |
置頂 |
10 | 45979 | 2016-07-08 19:59:25 作者 ss |
Tomato Firmware v1.28 shibby 132 DHCP轉發設定 作者 saturn00
|
0 | 6736 | 2015-11-04 10:56:56 作者 saturn00 |
TPLINK WDR3500 Gargoyle Router Firmware 作者 livilivilivi
|
1 | 9901 | 2014-08-22 08:47:15 作者 cts1628 |