數位天堂

Nokia:科技始終來自於人性; 拜耳:如果文明不能使我們更相愛,那科技便失去意義!
歡迎您的加入,讓我們一起討論科技與環保的整合應用...

您尚未登入。

#1 2011-10-19 23:29:54

7-11
新生
註冊日期: 2011-10-19
文章數: 26
目前積分 :   

RT-N16 刷 土司超人 1.28 7475.2 的問題

大家好請問一下
我購買一台 ASUS RT-N16
今天刷了 tomato-K26USB-1.28.7475.2MIPSR2-Toastman-RT-VPN-NOCAT  中文版

可是有一個問題
基本設定 > 網路 > 無線的頻寬 我設成 40MHZ
僅802.11n
頻道1
沒加密

但回到 系統狀況 > 系統資訊 看了一下 , 他顯示20MHZ , 而不是40MHZ

不知道是哪出問題了

可否告訴我 , 謝謝




離線

 

#2 2011-10-19 23:53:43

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: RT-N16 刷 土司超人 1.28 7475.2 的問題

先改成頻道6看看

但也有可能是受其他2.4GHz中之無線基地台無線訊號交疊產生干擾
雖啟動了40MHz,實際卻無法運行40MHz,最高只能達20MHz




技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#3 2011-10-20 00:14:41

7-11
新生
註冊日期: 2011-10-19
文章數: 26
目前積分 :   

Re: RT-N16 刷 土司超人 1.28 7475.2 的問題

謝謝你
已經解決了

今天新購的 , 刷蕃茄
但我刷完沒有把NVRAM 清掉

所以才有問題

清乾淨就沒問題了


再請教一個問題

土司超人 1.28 7475.2 R2 USB VPN NOCAT 中文版

是不是沒有支援 WPS .....
一直找不到

謝謝


離線

 

#4 2011-10-20 00:33:54

Aven
天使
來自: 數位天堂
註冊日期: 2007-07-15
文章數: 2266
網站

Re: RT-N16 刷 土司超人 1.28 7475.2 的問題

Tomato不支援WPS,而是把WPS按鈕拿去做更彈性的使用
例如當成無線網路的切換開關,或是你自行客製其他你想要的功能



技術問題請於論壇上集眾人之力公開討論,感恩 thankgod

離線

 

#5 2011-10-21 03:42:05

7-11
新生
註冊日期: 2011-10-19
文章數: 26
目前積分 :   

Re: RT-N16 刷 土司超人 1.28 7475.2 的問題

不好意思
再請教一個問題
我刷完看進去看他的CPU 只有跑 133MHZ
是不是哪裏出錯了呢 , 謝謝

root@Smart:/tmp/home/root# cat /proc/cpuinfo system type : Broadcom BCM4716 chip rev 1 pkg 10 processor : 0 cpu model : MIPS 74K V4.0 BogoMIPS : 66.35 cpu MHz : 133 wait instruction : no microsecond timers : yes tlb_entries : 64 extra interrupt vector : no hardware watchpoint : yes ASEs implemented : mips16 dsp shadow register sets : 1 VCED exceptions : not available VCEI exceptions : not available unaligned_instructions : 0 root@Smart:/tmp/home/root#


root@Smart:/tmp/home/root# dmesg Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #14 Thu Jun 2 18:29:23 ICT 2011 CPU revision is: 00019740 Determined physical RAM map: memory: 07fff000 @ 00000000 (usable) On node 0 totalpages: 32767 Normal zone: 255 pages used for memmap Normal zone: 0 pages reserved Normal zone: 32512 pages, LIFO batch:7 Built 1 zonelists. Total pages: 32512 Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200 Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 512 (order: 9, 2048 bytes) CPU: BCM4716 rev 1 pkg 10 at 133 MHz Using 66.500 MHz high precision timer. console [ttyS0] enabled Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 126832k/131068k available (33k kernel code, 4092k reserved, 2644k data, 116k init, 0k highmem) Calibrating delay loop... 66.35 BogoMIPS (lpj=331776) Mount-cache hash table entries: 512 NET: Registered protocol family 16 PCI: Using membase 8000000 PCI: Initializing host PCI: Reset RC PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Fixing up bridge PCI: Setting latency timer of device 0000:01:00.1 to 64 PCI: Enabling device 0000:01:00.1 (0004 -> 0006) PCI: Fixing up bus 1 NET: Registered protocol family 2 Time: MIPS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered squashfs: version 3.0 (2006/03/15) Phillip Lougher io scheduler noop registered (default) HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A PPP generic driver version 2.4.2 MPPE/MPPC encryption/compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V0.17 PPTP driver version 0.8.5 Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 Physically mapped flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Flash device: 0x2000000 at 0x1c000000 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x01fe0000 : "linux" 0x00121000-0x00700000 : "rootfs" 0x00700000-0x01fe0000 : "jffs2" 0x01fe0000-0x02000000 : "nvram" Found a 0MB serial flash sflash: found no supported devices u32 classifier OLD policer on Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1024 buckets, 8192 max) ip_tables: (C) 2000-2006 Netfilter Core Team net/ipv4/netfilter/tomato_ct.c [Jun 2 2011 13:45:07] NET: Registered protocol family 1 NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller VFS: Mounted root (squashfs filesystem) readonly. Freeing unused kernel memory: 116k freed Warning: unable to open an initial console. emf: module license 'Proprietary' taints kernel. PCI: Setting latency timer of device 0000:00:02.0 to 64 eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.147.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 eth1: Broadcom BCM4329 802.11 Wireless Controller 5.10.147.0 Algorithmics/MIPS FPU Emulator v1.5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb SCSI subsystem initialized Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver PCI: Setting latency timer of device 0000:00:04.1 to 64 ehci_hcd 0000:00:04.1: EHCI Host Controller ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.1: irq 5, io mem 0x18004000 ehci_hcd 0000:00:04.1: USB 0.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new interface driver usblp usblp: USB Printer Device Class driver vlan1: add 33:33:00:00:00:01 mcast address to master interface vlan1: add 01:00:5e:00:00:01 mcast address to master interface vlan1: dev_set_allmulti(master, 1) vlan1: dev_set_promiscuity(master, 1) device eth0 entered promiscuous mode device vlan1 entered promiscuous mode device eth1 entered promiscuous mode br0: port 2(eth1) entering forwarding state br0: port 1(vlan1) entering forwarding state vlan2: Setting MAC address to bc ae c5 c4 1c 60. vlan2: add 33:33:00:00:00:01 mcast address to master interface vlan2: add 01:00:5e:00:00:01 mcast address to master interface IMQ starting with 16 devices... IMQ driver loaded successfully. Hooking IMQ after NAT on PREROUTING. Hooking IMQ before NAT on POSTROUTING. root@Smart:/tmp/home/root#



最後修改: 7-11 (2011-10-21 03:44:03)


離線

 

#6 2011-10-21 04:36:43

7-11
新生
註冊日期: 2011-10-19
文章數: 26
目前積分 :   

Re: RT-N16 刷 土司超人 1.28 7475.2 的問題

問題解決了

原來要去 進階設定 > 其他設定 > CPU Frequency 做更改

只是不知道該選哪一個 , 目前選 480,240

上面還有二個 500,250 跟 532,266

不知道選了這二個會不會當機 , 呵


離線

 

相關討論主題

主題 回覆 點閱 最後發表
[Tomato] Toastman(土司超人)衍生版本 作者 hippo  [ 1 2 3 … 40 ]
391 1178689 2018-12-27 20:24:30 作者 zero1110
2 10811 2010-11-22 23:37:20 作者 otome

友情連結

論壇頁尾

Powered by PunBB
© Copyright 2018 Rickard Andersson
RSS Feed